Microscope – VoltLog

Voltlog #292 – Hayear Full HD 34MP Microscope Camera Review HY-1139

Welcome to a new Voltlog, you might recognize this, the trinocular microscope which I reviewed in Voltlog #282, it’s a great tool to have especially if you start to feel your eyesight is getting weaker but also if you have good eyesight you can’t possibly solder 0402 passives comfortably or you can’t spot very small problems on soldering joints without something like this.

However I had an issue with the camera, the image is too black and so far there has been no solution provided by Banggood but I am still in contact with them and they’ve told me they are working with the supplier to find a solution but due to the whole Coronavirus (COVID-19) issue, there’s been delays.

So I’ve asked them to send another camera for review, it’s a Hayear branded microscope camera, it’s capable of up to 2K at 30fps and 1080P at 60fps, it has HDMI and USB 2.0 output as well as SD card storage support. The USB output is capable of 1080P at 30fps but that’s okay, cause I will be using this on it’s HDMI output on the 1080p 60fps setting.

Voltlog #289 – InTheMail

Welcome to a new InTheMail, the series that will touch both your passion for electronics and your bank account at the same time. Before I get started I’m gonna take a second to remind you to subscribe to the channel and hit the bell notification icon because that’s the only way you will know for sure when I upload new videos.

I must say I’m noticing delays in delivery of these packages from China, it started with orders placed mid January and I’m probably going to see some packages lost and never delivered so i recommend you keep an eye on your orders and request a refund when the protection time expires.

Voltlog #282 – Did I get a trinocular microscope for micro-soldering and inspection?

Welcome to a new Voltlog, to save you from waiting, the short answer is yes, I did get a microscope for the lab but before I show you the microscope let’s talk about why I got a microscope and why you might want one. If you are occasionally soldering boards, electronic kits, mostly through hole components or even surface mount down to 0603 and you have good eyesight, then chances are, you don’t need such a microscope, I’ve been doing that for years.

On the other hand, if you want to be able to solder surface mount components smaller than 0603 comfortably or you want to do board level repairs on modern gadgets like smartphones and laptops, then you most definitely need a microscope as it will massively improve the quality of your soldering and the general repair process at your bench.