Tag: 3D Printer

Voltlog #239 – Upgrading The CR10 3D Printer With New Print Surface And Bed Insulation

Welcome to a new voltlog, it’s time for another upgrade on my Creality CR10 3D printer, and this time it’s about the print surface. By default this printer comes with a glass print surface which sits on top of the aluminium bed and that has worked fine for most prints and settings I’ve tried but occasionally I would get some adhesion problems and with glass you need to wait until the part has cooled down in order to remove it. Not such a big deal but there is this newer magnetic print surface, which has two parts, you get the bottom part with adhesive that you stick to the aluminium build plate of the printer and you get the top part which sticks magnetically to the other part.

This way, with the top surface I should get better adhesion and when the print is finished I can just remove the print surface from the printer to have it cool down faster or maybe for easier removal because I could just bend the surface to cause the part to unstick.

I’m also going to upgrade the bottom heater of the bed by installing one of these insulation sheets, this should help it reach working temperature faster and maybe it will use less power to keep it at working temperature.

Voltlog #226 – InTheMail

Welcome to a new InTheMail, the series that will touch both your passion for electronics and your bank account at the same time. We’re gonna start with this set of tweezers from Vetus. A few months ago I was considering buying some more expensive electronics tweezers but the good ones are really expensive when you include shipping as well so in the end I decided to give these a try. I’ve had Vetus tweezers in the past and some were good some were bad. This time I asked multiple sellers on Aliexpress if the tweezers are original Vetus or not, some responded and promised their goods are original. Coincidentally or not those who said their products are original also had higher prices. In my experience with suppliers, they never lie about the origins of a product if you directly ask them so I tend to believe that what I have here are genuine Vetus tweezers

 

 

Voltlog #213 – InTheMail

Welcome to a new voltlog, the series that will touch both your passion for electronics and your bank account at the same time. We’re gonna start the video with a battery charger from Liitokala, model number is Engineer Lii-500. It works with an external 12V power supply which I opted not to get because we all have a bunch of 12V adapter from old equipment.

Voltlog #181 – Installing Stepper Motor Vibration Dampers On The CR10

In this video you will see step-by-step how I installed a set of vibration dampers on my Creality CR10 3D printer. They feature two metallic parts and a compliant rubber part in the middle that connects the outer two. This will reduce vibrations coming from the motor, stopping them from passing through the frame.

Here are some links to places where you can get the parts shown in this video:

Voltlog #156 – Best Proximity Sensor For 3D Printer Auto Bed Leveling

In this video I am testing four different proximity sensors over the glass bed of my Creality CR10 3d printer.

Get the Creality CR10 3D printer from these places: Amazon, Aliexpress, or Banggood. 

Voltlog #147 – InTheMail

Welcome to a new InTheMail the series that will touch both your passion for electronics and your bank account at the same time.

Here is a list with all the items shown in the video and links to where you can get them:

 

Voltlog #141 – Creality CR-10 First Impression: It’s easy to print!

This is an update video to let you know how things are going with my new 3d printer, the Creality CR-10. The short version: it’s very easy to print with this system, even for a beginner like myself.

Here are some links to the products shown in the video: