In this comprehensive review, we take an in-depth look at the EastTester ET5410A+ Electronic Load, a 400W max, 150V, and 40A fully programmable dummy load. With its 3.2-inch TFT display, this unit promises an improved user interface over the 7-segment display found in the Kunkin KP184. However, as the review unfolds, it becomes clear that while the ET5410A+ has some notable strengths, it also has areas that could benefit from improvement.
One of the key aspects evaluated in the review is the accuracy and precision of the unit. The manufacturer claims a resolution of 1mV and 1mA, but the reviewer found that this was not always the case, with the display sometimes showing only 10mV and 10mA resolution. After some investigation, it was discovered that a setting in the menu allowed switching between a low range (20V, 3A) and a high range (150V, 40A), which affected both the maximum input and the display resolution.
The functionality of the ET5410A+ is impressive, with features like battery testing, LED testing, and transient testing modes. However, the review highlights some potential software bugs, particularly with the battery discharge feature in Constant Resistance mode, which some users reported issues with on older firmware versions.
Build quality is a mixed bag, with both good and bad aspects. The reviewer praises the overall PCB assembly but raises concerns about the mains earth wiring, placement of wires and connectors, and the lack of full plated footprint holes for the MOSFETs. Safety concerns are also raised, with the earth connection passing through the PCB and soldering issues observed during the teardown.